微流控耗材|SU8光刻胶|PDMS胶水|顶旭微控

Microfluidic surface treatment reagents

Fluorine oil, as a perfluoroalkane compound, is widely used as the continuous phase of water-in-oil droplets because of its low viscosity, high boiling point and good biocompatibility. What's more, according to the principle of similar solubility, fluorine oil is immiscible with hydrocarbon alkyl compounds, so fluorine oil, as a continuous phase, can be used to prepare not only water-in-oil droplets, but also acetonitrile-in-fluorine oil, DMF-in-fluorine oil, and methylene fluoride-in-fluorine oil...

Silicon

Silicon wafer plays an indispensable role in microfluidic chip fabrication and can be used to prepare SU8 molds, silicon molds, and silicon runner chips. SU-8 mold Silicon wafers are widely used in SU-8 mold preparation.SU-8 photoresist is a polymer material with excellent mechanical properties and chemical stability, which can be used to fabricate microchannels and microjunctions in microfluidic chip...

PMMA/PC/COC

Microfluidic chips utilize micromachining techniques to process tiny channels and microstructures onto micron-scale material surfaces to enable microfluidic control and manipulation. Common microfluidic chip polymer (plastic) materials include COC cyclic olefin polymers, PMMA and PC materials.

SU-8 photoresist/developer solution

SU-8 photoresist is a high-resolution, high-precision, high-adhesion negative photoresist, which is widely used in the field of micro and nanofabrication. In microfluidic chips, SU-8 photoresist is widely used in the preparation of microfluidic chips, which can be used to prepare microstructures such as microfluidic channels, reaction chambers, valves and pumps.

Glass materials

Microfluidic chips are miniaturized laboratory systems for controlling and manipulating tiny liquid fluids. Among other things, the material of the chip is crucial as it can directly affect the performance and stability of the chip. One of the commonly used materials for microfluidic chips is glass. Glass has many advantages, such as excellent chemical stability, transparency, high temperature stability, and corrosion resistance. In addition, ...

PDMS Film/Microporous Membrane

PDMS (polydimethylsiloxane) PDMS is a commonly used material for microfluidic chips, and its full name is polydimethylsiloxane.PDMS has the following advantages, which make it a commonly used material in microfluidic chip preparation: In conclusion, PDMS is one of the commonly used materials in microfluidic chip preparation, with good transparency, biocompatibility, flexibility and plasticity. ...

Consumables

Microfluidic surface treatment reagents

Silicon

PMMA/PC/COC

SU-8 photoresist/developer solution

Glass materials

PDMS Film/Microporous Membrane

navigation menu

Contact Us

WeChat